Untitled Document

Quick Shop

Departments...

Shopping cart


0 Product(s) in cart
Total £0.00



TTP Carb Stage 1 Torque Induction Kit Reviews for the product - TTP Carb Stage 1 Torque Induction Kit (Back to product)
 
 
4 Product Reviews - Average rating 5 / 5 (Best Rated | Worst Rated | Most Recent | Oldest)

Click to review this product

Fantastic upgrade

- 14th June 2017

Fitted to 2006 carb model scrambler in conjunction with Arrow 2 into 1 pipe.
As stock these bikes produce only around 42bhp at the rear wheel. After removing the AI system and air box baffle, igniter remap, change to DNA filter and re jetting ( set up on dyno) the bike now puts out 57 bhp at the wheel and 53ft/lbs torque. Runs smoother, pulls harder and is a much better bike for it. Midrange is particularly impressive and great for real road riding.
Totally recommend TTP products for value and great service. Can't think of a better upgrade package than what's available from them.


Big combo power upgrade!

- 15th May 2017

Added free flow exhausts. Did Breathe and removed airbox baffle. Removed air induction and used largest main jets with single shims. Kept OEM pilot jets as no overrun experienced. Will balance carbs and adjust pilot screw. Added igniter coil and TTP Fire Starter. Bugger me, the 08 bonnie screams now. Massive changes to rev limits, torque and acceleration. Barnet clutch springs next and onto brake n shocks. Great products guys.. highly recommended!

Great

- 09th September 2016

Easy to fit,does what it's meant to.
Excellent, thanks.


Do you want more usable power for your Speedmaster? This is the kit you need.

- 28th July 2016

Kit arrived quickly, thank you TTP.

Did the easy bit first and fitted the breather and filter, took the Speedy for a run, could feel some improvement and a lot better induction sound. The second part, rejetting, great instructions in the kit, thanks again TTP.

If I could offer some advice, dont rush this job give yourself some time then you will not get stressed when you remove the carbs, fiddly but take your time. I fitted the larger main jet as advised in the instructions, fitted one shim to each needle and very important fitted the new hex screws when closing the carbs up. Started the bike, very crisp on the throttle, nice. Took the bike out for a good run, 80 miles. Engine response noticably better and above 3500 rpm just hang on. What a transformation. Want a wolf in sheeps clothing, fit this kit. Enjoy. Keep your knees in the breeze!


Click to review this product

These products are recommended for your bike.

Fire Starter Performance Igniter Unit

List Price: £180.00
Price: £180.00 (£216.00 Inc. VAT)
€213.07 EUR (+VAT)    $232.89 USD    $311.70 AUD
Configure
Keihin CVK D-Tool

Price: £3.00 (£3.60 Inc. VAT)
€3.55 EUR (+VAT)    $3.88 USD    $5.19 AUD
Add to cart


Motion Pro Carb Tool

Price: £14.00 (£16.80 Inc. VAT)
€16.57 EUR (+VAT)    $18.11 USD    $24.24 AUD
Add to cart
Triumph Twin Ignition Advance Remap

Price: £85.00 (£102.00 Inc. VAT)
€100.62 EUR (+VAT)    $109.98 USD    $147.19 AUD
Configure